Check trailer lighting circuits on your own and understand what volts and amps tell you. A practical guide from the makers of the Lone Wolf Trailer Tester.
Home Assistant turns a boat or RV's mix of gear into one dashboard and a set of quiet little robots. The setup, the first automations worth doing, and the AI trick that writes the YAML for you.
When the batteries are full and the sun is still working, we dump the surplus into the water heater — free hot showers from power that had nowhere else to go. Here is the automation that runs it.
Our anchor light switches itself on at sunset and off at sunrise — legal every night without a second thought. Here is the simple automation behind it.
The Cerbo GX ties your entire Victron system together. Here is how to install it, connect your devices, and set up remote monitoring via VRM.
Frozen pipes and dead batteries are preventable. A complete winterization checklist covering water systems, waste, batteries, exterior, and interior.
Start with Victron’s official diagrams. Then use this 500A guide to understand the terminals, optional GX connection and checks that catch misleading readings.
Most smart home gear is AC-only. Shelly devices work natively on 12V DC — wire them directly to your RV or boat system and control everything through Home Assistant.
From weather routing to engine health prediction, AI is showing up on boats in practical ways. Here's what actually works for cruisers and liveaboards.
AI is quietly making RVs smarter — from predictive maintenance to voice-controlled systems. Here's what's real, what's hype, and what you can use today.
Stop guessing. Here's how to calculate exactly what solar panels, batteries, and charge controller you need.
CAN bus, BLE sensors, and the current state of RV monitoring — from someone who built their own system.
Step-by-step guide to replacing your RV waste valve without dropping the tank.